Quality original replacement parts to fit your
needs. Please note that the pellet stove part list below is only a list of
the most common parts
for models: J1812, S2505, F2901 and A1108. Call in or send us an e-mail for any other parts you
might require.
Click image for close-up
$199Reg.$219
LC100 Loading Chute:
To be used with the pellet stove insert model J1812I and S2505I as an
optional item. The LC100 loading chute will make it easier to load the
pellets into the pellet stove hopper as part of the pellet stove is
inserted in the fireplace opening.
$199Reg.$219
HE2 Hopper extension:
This hopper extension will increase your pellet stove's capacity to 100lb. For
Model J1812 and S2505
$79Reg.$95
CV100 Check Valve:
The optional check valve goes onto the fresh air intake tube at the back of the
pellet stove and will prevent reversal of air flow. In case of a power
cut, it will stop lingering smoke entering the habitation.
$69Reg.$79 AK100 Fresh Air Intake Kit:
This kit will introduce fresh, oxygen rich air into the burn pot from the
outside of your home. It also takes the place of a Check valve.
$119Reg.$139
WTK-P Remote Thermostat:
Believe it or not pellet stoves have come a long way and can now be
controlled remotely from a wall thermostat in a fully automatic mode.
Turn on your pellet stove when you are not home and / or just cycle the
pellet stove according to the set temperature.
$189Reg.$209
SURSTD-P Surround :
This wood pellet stove surround is used for pellet stove insert models J1812 and
S2505 to bridge the gap between the pellet stove body and the fireplace opening.
$225Reg.$249
KSHHE200 Hopper extension:
This hopper extension will increase your pellet stove's capacity to 200lb.
Hopper is not exactly as shown in picture.
$359Reg.$383
KSHHE280 Hopper extension:
This hopper extension will increase your pellet stove's capacity to 280lb.
Hopper is not exactly as shown in picture.
Click image for close-up)
)
)
)
)
)
